OU-BAND Dog Training Collar 330 Yards Remote Waterproof Shock Collar with Beep/Vibration/Shock Electric E-collar (Review)

Description

It takes only a second to turn on the remote. 

Used carefully and compassionately, it can serve to make dog training more effective. It goes through the phases of Beep, Vibration, and Shock to better condition your dog and give you, the owner full control of the training process. 

Description: 

– 4 modes: static shock/ vibration/ beep/ light 

– 100 levels of vibration and static 

– Rechargeable collar remote and receiver 

– Easy to read large clear LCD display 

– Waterproof collar receiver 

– Adjustable strap 

How to Connect the Transmitter with the Collar Receiver: 

1.Turn on the Transmitter by holding the MODE button for 5 seconds, and choose channel 1 or 2 to encode 

2.Turn on the Receiver Collar by pressing the on/off button or if its already turned on 

3.Then press the on/off button again and hold it for 5 seconds, the LED light will start to flash 

4.You can hear 1st beep from the receiver collar, press the “Y” button on the Transmitter immediately.

About the Water Resistance 

– Water resistance Level: IP3(Can withstand water equivalent to 0.7 liters per minute if the lid is secured properly) 

– The collar can be worn in light drizzles but must be removed before bathing or swimming 

– Please note that submerging the collar in water WILL cause damage 

Package Contents

2 x Receiver Collar 

2 x Adjustable Belt 

1 x Remote Transmitter 

1 x Charger 

1 x Test Bulb 

1 x Metal Probes 

4 x Screw Caps 

1 x Guide 

Note for Use

when first using, you should check under the dog’s neck to make sure there’s no wound. It’s also a good idea to brush their coat and check their skin daily. If you need any help when you use the product, please feel free to contact our customer service for help.



My review; 


First off please make sure you don’t start this out on full blast shock no animal needs to be done like that. 

Once you open up the box you will see everything you need to get started. This came with one orange color collar and a black one. Yes you can control two dogs at once. Now once you get the collars put together and charged up everything. You will need to sync the transmitter and receiver. It shouldn’t take more than a few minutes. Then you are ready to place the collar on the dogs neck. You will need to check the dog to make sure it’s neck is ok before placing the collar onto it. The adjustable collar is nice to have so it can fit small, medium or large dogs. I placed mine on my dog and played around with some of the modes. It has a total of 4 modes on this model static shock/ vibration/ beep/ light. Now I don’t like the shock at all for my animals. If I’m going to train my dog not to bark I want it to be the beep or vibration. You can move the numbers up as needed for your animal. They will realize what’s going on before you get the numbers too high I’m sure. Mine did and is doing great using this collar. I also like that it’s waterproof so if it happens to rain and the dog get wet it will still work. Good training collar and never had any problems out of it and can already tell a difference. 

All thoughts and opinions are 100% my own. 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s